SAF501 Grab wire switch assembly

No image set
No image set

  A Grab wire can be fitted to allow for an emergency pull cord which extends for a large distance around the bay. Many grab wire units can be used. The Grab wire connects into an RWS for easy installation. The tension of the cable must be set so that the indicator on the grab wire body lies between the two indicator marks. At this point the plunger can be pulled out setting the device to green - armed. Upon pull of grab wire, RWS sends signal back to control box activating full safety system.


Extra Information

Width:7 cm
Product Code:SAF501 Grab wire switch assembly
Length:14 cm
Product Type:
Height:20 cm
Mass:1 kg

Related Categories